Toll Free: 1.866.992.5293

Your Cart

Top Sellers

NEW! Check Out Our Fire Pits

Platinum Reflective Fire Glass

Copper Reflective Fire Glass

Black Reflective Fire Glass

Azuria Fire Glass

Cobalt Blue Fire Glass

Mixed Ceramic Fire Balls

Ceramic Fire Stones Set

Birch Ceramic Logs

Ceramic Pine Cones

CrossFire Ceramic Logs

To be re-directed to

BLAZINGLOGS
click here

1.		Make sure gas is turned off and the fire pit is clear of any brush or debris.
2.		If fire pit has an existing round burner you can use it but make sure that it is not rusted through. If you decide to use your existing burner, jump to step 4. If you decide to change the burner, remove the old burner.
3.		Place the burner into the fire pit with the holes facing down, and place the plug on the top of the burner.
4.		Fill the gaps with lava rock but, not necessary if you have enough glass.
5.		Open Fire Glass bags and pour over the burner and lava rock.
6.		Make sure all open spaces and gaps are filled.
7.		Light the burner to test for even flame and to assure the flame is in the right position.
8.		Step back and watch while the flames dance on the glass!