1. |
 |
Make sure gas is turned off and the damper clamp provided is on the fireplace damper. |
2. |
 |
Connect elbow fitting on gas pipe. Make sure you use two pipe wrenches when installing the elbow, one on the elbow and one on the pipe. Make sure the pipe from the fireplace does not turn. Use gas tape to place on the male threads. |
3. |
 |
Place the 45 degree elbow or straight connection onto the burner. Use gas tape on the male side. |
4. |
 |
Connect the stainless steel gas flex line to the burner. No tape is needed. |
5. |
 |
Connect the stainless steel gas flex line to the house gas. No tape is needed. |
6. |
 |
Place the burner in position. Light the burner. |
7. |
 |
Test the connection for any leaks. |
8. |
 |
Open Fire Glass bags and pour glass into the pan. |
9. |
 |
Re-light the burner to test for even flame and to assure the flame is in the right position. |
10. |
 |
Step back and watch while the flames dance on the glass! |
Flash item will go here
Pan Burner Fireplace Installation
Top Sellers
NEW! Check Out Our Fire Pits
Platinum Reflective Fire Glass
Copper Reflective Fire Glass
Black Reflective Fire Glass
Azuria Fire Glass
Cobalt Blue Fire Glass
Mixed Ceramic Fire Balls
Ceramic Fire Stones Set
Traditional Alternatives at
BLAZINGLOGS
Birch Ceramic Logs
Ceramic Pine Cones
CrossFire Ceramic Logs
- FOLLOW US ON:
Copyright © 2013 BlazingGlass.com, all rights reserved